183 in. (4,725 mm) Transport: 110 in. (2,800 mm) at wing wheels
Weight
5,650 lbs. (2,568 kg)
Cutting Width
180 in. (4,572 mm)
Cutting Height
1 - 16 in. (25 - 406 mm) for clearance over terraces
MEASUREMENTS
Cutting Capacity
Diameter: 4 in. (101.6 mm)
Wing Flex Angle
90° up, 22° down
Blades
Type: Suction or offset Material Flow System: Max flow
Blade Size
Thickness: 0.5 in. (13 mm) Width: 4 in. (102 mm)
Blade Overlap
6 in. (152 mm)
Bladeholder/Carrier
Round stumpjumper and standard deck rings
Deck Thickness
Upper: 0.138 in. (3.5 mm), 10 gauge Lower: 0.177 in. (4.5 mm), 7 gauge
Skirt Thickness
0.25 in. (6 mm)
OPERATIONAL
Cutting Chamber
Depth: 10.5 in. (267 mm)
Driveline Protection
No-seize, self-adjusting slip clutch
Number of Gearboxes
4
Gearcase Power Rating
Transfer Continuous: 250 hp (186 kW) Peak: 300 hp (224 kW) Center & Outer Continuous: 120 hp (895 kW) Peak: 160 hp (119 kW)
Wheels
Type: 5-bolt 21x5.25x9 laminated or 5-bolt 26x9x14.5 24-ply severe-duty ag Suspension: Air cushion withshock absorbers on all 4 wheel standards Wing Leveling Adjustment: Easy adjust turnbuckle with bearing
Front Deflector & Foot Guard
Chain
Rear Deflector
Chain
Tractor PTO Speed
540 or 1,000 rpm
Tractor Hitch
Width: 22.5 in. (570 mm)
Hitch Type
Pull-type with ball-type self-leveling hitch clevis (pull-type has standard 10,000 lb. safety tow chain)
Tractor Size
55 hp min.
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer vehicle freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
