|
 |
2008 John Deere Construction CT332
|
 |
|
|
|
|
Productivity
Smooth ™ quiet turbocharged 5-cylinder John Deere PowerTech™ diesel engine delivers exceptional reliability, power, and torque.
Patented vertical-lift boom with cushioned boom cylinders provides exceptional load stability, lift-height, and reach.
Purpose-built for rigorous tasks on steep slopes, sand, and muddy terrain.
Unsurpassed stability, breakout, bucket capacity, tractive effort, and travel speed for best-in-class productivity.
Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments.
Comfort
Five-roller track frames, unique front idler / roller design, and steel-imbedded rubber tracks deliver a smooth and comfortable ride.
Industry's best visibility includes clear sight lines to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides, rear corners, and directly behind.
Sculpted seat, ergonomically correct armrests, and adjustable foot pedals provide day-long comfort and support.
Smooth and responsive low-effort controls enhance comfort, reduce fatigue.
Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches.
Optional four-season cab with heater, defroster and air-conditioner.
Uptime / Service
All-steel rollers and idlers, metal-faced seals and journal bearings, and steel-reinforced rubber tracks make John Deere's easy-clean undercarriage significantly less expensive to operate and maintain.
500-hour engine oil and filter service intervals and large fuel tank mean fewer interruptions.
Check track tension every 50 hours and adjust as needed with a grease gun.
Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment.
Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions.
Hinged doors and easy-to-remove panels provide wide-open access. Daily checkpoints and refueling are convenient and quick.
|
|
|
|
| Manufacturer |
|
John Deere Construction |
|
|
| Model Year |
|
2008 |
|
|
| Model |
|
CT332 |
|
|
| MSRP |
|
Request a Quote
|
|
|
| DIMENSIONS | |
| Length Overall |
|
Without Bucket: 115.5 in. (2,934 mm)
With Bucket: 138.5 in. (3,518 mm) |
|
|
| Height |
|
To Top of ROPS: 82.9 in. (2,106 mm)
To Hinge Pin: 127 in. (3,226 mm) |
|
|
| Width |
|
80.6 in. (2,047 mm) |
|
|
| Weight |
|
10,825 lbs. (4,910 kg) |
|
|
| Ground Clearance |
|
11 in. (279 mm) |
|
|
| Turning Radius |
|
83.7 in. (2,126 mm) |
|
|
| Tank Capacity |
|
28 gal. (106 l) |
|
|
| DRIVETRAIN | |
| Track Width |
|
17.7 in. (450 mm) |
|
|
| ENGINE | |
| Engine Make |
|
John Deere PowerTech™ |
|
|
| Engine Model |
|
5040Tw |
|
|
| Cylinders |
|
5 |
|
|
| Gross Horsepower |
|
82 hp (61.5 kW) @ 2,800 rpm |
|
|
| Net Horsepower |
|
76 hp (56.7 kW) @ 2,800 rpm |
|
|
| Displacement |
|
186 ci (3 l) |
|
|
| Rated Speed |
|
Single: 6.2 mph (9.8 km/h)
Two Low: 5.3 mph (8.5 km/h)
Two High: 7.8 mph (12.6 km/h) |
|
|
| BATTERY | |
| Voltage |
|
12V |
|
|
| Amps |
|
70A |
|
|
| HYDRAULICS | |
| Std Pump Flow |
|
24 gpm (91 lpm) |
|
|
| Opt Pump Flow |
|
34 gpm (129 lpm) |
|
|
| OPERATIONAL | |
| Dump Height |
|
102 in. (2,591 mm) |
|
|
| Dump Reach |
|
Heavy-Duty Foundry: 33 in. (841 mm)
Heavy-Duty Construction: 40 in. (1,019 mm) |
|
|
| Bucket Breakout Force |
|
Heavy-Duty Foundry: 11,600 lbs. (5,262 kg)
Heavy-Duty Construction: 8,210 lbs. (3,724 kg) |
|
|
|
|
|
|
|
|
|
|
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer vehicle freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected. |
|
|
|
|
|
|
|
|
