The RCP2660 and RCPM2660 hydraulic parallel arm rotary cutters provide excellent cutting performances on ditch banks and other sloping areas adjacent to right-of-ways, lakes, ponds and streams. The RCP26 works equally as well in and around areas of restricted access such as over or under fences, guardrails, low overhanging branches, tree limbs and hedges. These units perform extremely well in tall grass cutting applications and will easily cut through standing brush up to two inches in diameter. The optional gauge wheel package allows the cutter deck to float over undulations without having to constantly monitor terrain conditions.
The RCP2660 and RCPM2660 cutters are adapted for Category 2 or 3 three-point hitch mounting on 75-150 horsepower tractors weighing 7,000 pounds or more. Pump and reservoir system require either 540 or 1,000 rpm input. Cutter drive and tractor need to be equipped with, depending upon hydraulic configuration, one to four hydraulic outlets to operate the cutter’s parallel arms and deck.
The RCP3060 offers a horizontal cutting reach of 18 foot 10 inches, which is a three foot longer reach than the RCP26 Series model. The 30 Series is great for those roadsides that want a manicured look further down the ditch, or being able to stay a little further away from the soggy banks of the pond.
